11.5 diamond wire saws for concrete cutting and quarrying, granite cutting, marble cutting
We produce different sizes of high quality diamond wire saws, can be used for a variety of granite and other hard stone mining, concrete cutting, slotting, cutting and so on.
Advantage in quarrying and mining:
Mining with a wire saw can reduce the waste of mining resources,
2. Dust-free, noise-free, safe, reliable, high capacity and fast efficiency.
3. The rubber protects the wire very well and increases the power of the wire saw.
4. Normally injection wire saw is used for mining calcareous stone
5. Comprehensive low cost for mining
Bead fixing methods: Spring holding up, plastic injection, rubber injection, plastic(rubber) injection plus spring holding up.
Diamond wire saw is applied to stone quarrying, block shaping, cutting for abnormal shape and carrying out construction engineering and so on. Different bonded and diamond concentration is available for material such as granite, marble, concrete, limestone, sandstone etc.
A. High efficiency
B. Small cutting slot: It can reduce waste of material and no hurt to stones.
C. Easy use: Easy to use, no special skill in using. Unlimited of size of work piece, can be used for dressing and forming for abnormal profile.
D. Good flexibility
1. the wire tension is generally 250-300kg (Φ4-5mm wire rope)
2. wire saw cutting speed according to different material:
1-2 grade granite: 25-30 meters / s
3-4 grade granite: 22-26 m / s
Grade 5 granite: 20-24 m / s
Marble: 30-45 m / s
Abrasive rock: 30-35 m / s
3. water flow is 12-25L/min
|Cutting Type||Diameter (mm)||Fixing Type||Beads (pcs/m)||Line Speed(m/s)||Cutting Speed(m2/h)||Lifetime(m2/m)|
|Other specification available upon request|